TINMORRY PETG Marble Filament
Prix
$28.95
Pre-order | available from: 2025-05-07
Impossible de charger la disponibilité de la réception
Use this text to encourage communication or promote sharing on social networks.
- Marble-like finish
- Good Heat Resistance
- High-speed printing
- 1.75±0.03 mm
- Recommend using a hardened steel nozzle with a diameter greater than 0.6mm
| Accessory Compatibility | |
| Build Plate | PEI Plate, High temperature Plate(Bambu), Engineering Plate(Bambu) |
| Hotend | 0.4mm/0.6mm/0.8mm, Steel/Hardened Steel |
| Glue | Spray Adhesive/Liquid Glue for Print Bed |
| Printer Enclosure | Enclosed/Open Depending on Environment Temperature |
| Recommend Settings | |
| Drying Settings | 65°C ,8-12 hours (Convection Oven) |
| Nozzle Temperature | 225-250°C |
| Bed Temperature | 75-90°C |
| Print Speed | ≤ 300 mm/s |
| Annealing Settings | 60°C, 6-12 hours |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Physical Properties | |
| Density | 1.28 g/cm³ |
| Vicat Softening Temperature | 79°C |
| Heat Deflection Temperature | 70°C |
| Melting Temperature | 190-200°C |
| Melt Index | 9 g/10 min |
| Continuous Operating Temperature for Printed Parts | 65°C |
